A next-generation optical sensor for IceCube-Gen2

The IceCube-Gen2 Collaboration

A next-generation optical sensor for IceCube-Gen2

The IceCube-Gen2 Collaboration

Physics and Astronomy

Stony Brook University

University of Wisconsin-Madison
Chiba University
University of Münster
Loyola University Chicago
German Electron Synchrotron
University of Canterbury
Université libre de Bruxelles
University of Copenhagen
The Oskar Klein Centre
University of Geneva
Ohio State University
Karlsruhe Institute of Technology
University of Delaware
Harvard University
Marquette University
Pennsylvania State University
Friedrich-Alexander University Erlangen-Nürnberg
Massachusetts Institute of Technology
South Dakota School of Mines & Technology
Columbia University
University of California at Irvine
University of California at Berkeley
University of Wuppertal
Ruhr University Bochum
Technical University of Munich
University of Rochester
University of Maryland, College Park
University of Padua
University of Kansas
Moscow Engineering Physics Institute
Lawrence Berkeley National Laboratory
RWTH Aachen University
Johannes Gutenberg University Mainz

Research output: Contribution to journal › Conference article › peer-review

1 Scopus citations

Abstract

For the in-ice component of the next generation neutrino observatory at the South Pole, IceCubeGen2, a new sensor module is being developed, which is an evolution of the D-Egg and mDOM sensors developed for the IceCube Upgrade. The sensor design features up to 18 4-inch PMTs distributed homogeneously in a borosilicate glass pressure vessel. Challenges arise for the mechanical design from the tight constraints on the bore hole diameter (which will be 2 inches smaller than for IceCube Upgrade) and from the close packing of the PMTs. The electronics design must meet the space constraints posed by the mechanical design as well as the power consumption and cost considerations from over 10,000 optical modules being deployed. This contribution presents forward-looking solutions to these design considerations. Prototype modules will be installed and integrated in the IceCube Upgrade.

Original language	English
Article number	1062
Journal	Proceedings of Science
Volume	395
State	Published - Mar 18 2022
Event	37th International Cosmic Ray Conference, ICRC 2021 - Virtual, Berlin, Germany Duration: Jul 12 2021 → Jul 23 2021

Cite this

@article{313aac7676d8411883bdf5aecd8eaf05,

title = "A next-generation optical sensor for IceCube-Gen2",

abstract = "For the in-ice component of the next generation neutrino observatory at the South Pole, IceCubeGen2, a new sensor module is being developed, which is an evolution of the D-Egg and mDOM sensors developed for the IceCube Upgrade. The sensor design features up to 18 4-inch PMTs distributed homogeneously in a borosilicate glass pressure vessel. Challenges arise for the mechanical design from the tight constraints on the bore hole diameter (which will be 2 inches smaller than for IceCube Upgrade) and from the close packing of the PMTs. The electronics design must meet the space constraints posed by the mechanical design as well as the power consumption and cost considerations from over 10,000 optical modules being deployed. This contribution presents forward-looking solutions to these design considerations. Prototype modules will be installed and integrated in the IceCube Upgrade.",

author = "\{The IceCube-Gen2 Collaboration\} and Vedant Basu and Aya Ishihara and Markus Dittmer and Nobuhiro Shimizu and R. Abbasi and M. Ackermann and J. Adams and Aguilar, \{J. A.\} and M. Ahlers and M. Ahrens and C. Alispach and P. Allison and Alves, \{A. A.\} and Amin, \{N. M.\} and R. An and K. Andeen and T. Anderson and G. Anton and C. Arg{\"u}elles and Arlen, \{T. C.\} and Y. Ashida and S. Axani and X. Bai and Balagopal, \{A. V.\} and A. Barbano and I. Bartos and Barwick, \{S. W.\} and B. Bastian and V. Basu and S. Baur and R. Bay and Beatty, \{J. J.\} and Becker, \{K. H.\} and \{Becker Tjus\}, J. and C. Bellenghi and S. BenZvi and D. Berley and E. Bernardini and Besson, \{D. Z.\} and G. Binder and D. Bindig and A. Bishop and E. Blaufuss and S. Blot and M. Boddenberg and M. Bohmer and F. Bontempo and J. Borowka and S. B{\"o}ser and J. Kiryluk",

note = "Publisher Copyright: {\textcopyright} Copyright owned by the author(s).; 37th International Cosmic Ray Conference, ICRC 2021 ; Conference date: 12-07-2021 Through 23-07-2021",

year = "2022",

month = mar,

day = "18",

language = "English",

volume = "395",

journal = "Proceedings of Science",

issn = "1824-8039",

}

TY - JOUR

T1 - A next-generation optical sensor for IceCube-Gen2

AU - The IceCube-Gen2 Collaboration

AU - Basu, Vedant

AU - Ishihara, Aya

AU - Dittmer, Markus

AU - Shimizu, Nobuhiro

AU - Abbasi, R.

AU - Ackermann, M.

AU - Adams, J.

AU - Aguilar, J. A.

AU - Ahlers, M.

AU - Ahrens, M.

AU - Alispach, C.

AU - Allison, P.

AU - Alves, A. A.

AU - Amin, N. M.

AU - An, R.

AU - Andeen, K.

AU - Anderson, T.

AU - Anton, G.

AU - Argüelles, C.

AU - Arlen, T. C.

AU - Ashida, Y.

AU - Axani, S.

AU - Bai, X.

AU - Balagopal, A. V.

AU - Barbano, A.

AU - Bartos, I.

AU - Barwick, S. W.

AU - Bastian, B.

AU - Basu, V.

AU - Baur, S.

AU - Bay, R.

AU - Beatty, J. J.

AU - Becker, K. H.

AU - Becker Tjus, J.

AU - Bellenghi, C.

AU - BenZvi, S.

AU - Berley, D.

AU - Bernardini, E.

AU - Besson, D. Z.

AU - Binder, G.

AU - Bindig, D.

AU - Bishop, A.

AU - Blaufuss, E.

AU - Blot, S.

AU - Boddenberg, M.

AU - Bohmer, M.

AU - Bontempo, F.

AU - Borowka, J.

AU - Böser, S.

AU - Kiryluk, J.

PY - 2022/3/18

Y1 - 2022/3/18

N2 - For the in-ice component of the next generation neutrino observatory at the South Pole, IceCubeGen2, a new sensor module is being developed, which is an evolution of the D-Egg and mDOM sensors developed for the IceCube Upgrade. The sensor design features up to 18 4-inch PMTs distributed homogeneously in a borosilicate glass pressure vessel. Challenges arise for the mechanical design from the tight constraints on the bore hole diameter (which will be 2 inches smaller than for IceCube Upgrade) and from the close packing of the PMTs. The electronics design must meet the space constraints posed by the mechanical design as well as the power consumption and cost considerations from over 10,000 optical modules being deployed. This contribution presents forward-looking solutions to these design considerations. Prototype modules will be installed and integrated in the IceCube Upgrade.

AB - For the in-ice component of the next generation neutrino observatory at the South Pole, IceCubeGen2, a new sensor module is being developed, which is an evolution of the D-Egg and mDOM sensors developed for the IceCube Upgrade. The sensor design features up to 18 4-inch PMTs distributed homogeneously in a borosilicate glass pressure vessel. Challenges arise for the mechanical design from the tight constraints on the bore hole diameter (which will be 2 inches smaller than for IceCube Upgrade) and from the close packing of the PMTs. The electronics design must meet the space constraints posed by the mechanical design as well as the power consumption and cost considerations from over 10,000 optical modules being deployed. This contribution presents forward-looking solutions to these design considerations. Prototype modules will be installed and integrated in the IceCube Upgrade.

UR - https://www.scopus.com/pages/publications/85145018719

M3 - Conference article

SN - 1824-8039

VL - 395

JO - Proceedings of Science

JF - Proceedings of Science

M1 - 1062

T2 - 37th International Cosmic Ray Conference, ICRC 2021

Y2 - 12 July 2021 through 23 July 2021

ER -

A next-generation optical sensor for IceCube-Gen2

Abstract

Other files and links

Fingerprint

Cite this