Femtosecond laser drilling of crystalline and multicrystalline silicon for advanced solar cell fabrication

The rear contact solar cell concept has been implemented to increase the solar cell efficiency. Practically, it necessitates rapid fabrication of a large number of via holes to form low-loss current paths. It is not a trivial task to drill a number of microscopic holes through a typical Si wafer of ̃200 μm thickness at reasonable processing throughput and yield. In this research, a femtosecond laser is employed to drill via holes in both crystalline silicon (c-Si) and multicrystalline silicon (mc-Si) thin wafers of ̃170 μm thickness with various laser parameters such as number of laser shots and pulse energy. Since a significantly high pulse energy compared to ablation threshold is mainly applied, aiming to achieve a rapid drilling process, the femtosecond laser beam is subjected to complex non-linear characteristics. Therefore, the relative placement of the sample with respect to the laser focal position is also rigorously examined. While the non-linear effect at high pulse energy regime is complex, it also facilitates the drilling process in terms of achieving high-aspect ratio, for example, by extending the effective depth of focus by non-linear effect. Cross-sectional morphological analysis in conjunction with on-line emission and shadowgraph imaging are carried out in order to elucidate the drilling mechanism.