Skip to main navigation Skip to search Skip to main content

Random vibration test for electronic assemblies fatigue life estimation

  • State University of New York Binghamton University
  • Konkuk University

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

22 Scopus citations

Abstract

In this study both finite element modeling and experimental techniques are employed to study the reliability of electronics components under random vibration loading conditions. A fatigue life estimation procedure, that would help analyst to make relatively accurate prediction of induced fatigue life, Finite Element model of the test vehicle is built using ANSYS software. The model is first validated by correlating the natural frequencies, mode shapes and transmissibility functions from simulation with experimentally measured ones. The model is then used to simulate both sinusoidal and random vibration tests to obtain the stress and the response spectrum at critical solder interconnects respectively. Results show that the corner solder ball experience the highest stress level under both tests, hence averaged stress at this solder ball was used the construct the SN curve of the solder material and later to calculate the fatigue life using Steinberg method. A comparison between simulation and experimental results is conducted at the end and a good correlation is obtained.

Original languageEnglish
Title of host publication2010 12th IEEE Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems, ITherm 2010
DOIs
StatePublished - 2010
Event2010 12th IEEE Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems, ITherm 2010 - Las Vegas, NV, United States
Duration: Jun 2 2010 → Jun 5 2010

Publication series

Name2010 12th IEEE Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems, ITherm 2010

Conference

Conference2010 12th IEEE Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems, ITherm 2010
Country/TerritoryUnited States
CityLas Vegas, NV
Period06/2/10 → 06/5/10

Keywords

  • Fatigue life
  • Fe model correlation
  • Modal analysis
  • Random vibration

Fingerprint

Dive into the research topics of 'Random vibration test for electronic assemblies fatigue life estimation'. Together they form a unique fingerprint.

Cite this