The relationship between lattice matching and crosshatch in liquid phase epitaxy HgCdTe on CdZnTe substrates

X-ray topography provides a very sensitive map of lattice mismatch between a HgCdTe LPE epitaxial layer and its (111) CdZnTe substrate. A well-defined Crosshatch pattern in the three «110» directions indicates a positive room-temperature lattice mismatch. For conditions of near-perfect lattice matching (±0.003% mismatch), the Crosshatch pattern disappears, presumably because there are few or no misfit dislocations present near the interface, and a region free of topographic contrast is observed. The crosshatch-free region occurs for a small positive room-temperature mismatch (about 0.02%); this is attributed to differences in the lattice matching condition at room temperature and the growth temperature. For negative mismatches, where the film is in tension, a mosaic pattern, rather than a crystallographically oriented Crosshatch, is observed in the topograph. Rocking curve full width at half maximum of the epitaxial layer is minimized in the crosshatch-free zone at a value nearly equal to that of the substrate. Etch pit density of the HgCdTe layer shows a strong minimum for perfect room temperature lattice matching, with values as low as 1 x 10⁴ cm^-2. For nearly lattice matched layers, Crosshatch is present throughout the thickness of the epitaxial layer except for a narrow graded-composition region near the substrate interface. Crosshatch contrast appears to result from long-range strain fields associated with a misfit dislocation network near the substrate interface. Spatial variations in topographic features and mismatch across relatively small lateral distances are caused by variations in substrate alloy composition. For truly lattice-matched substrates, better control over the substrate lattice parameter is required.