Thermal resistance and compressive strain of underwater aerogel-syntactic foam hybrid insulation at atmospheric and elevated hydrostatic pressure

The purpose of this study was to present a new underwater thermal insulation designed for flexibility and high thermal resistance. The insulation was a hybrid composite of two constituents: syntactic foam and an insulating aerogel blanket. Methods for treating and combining the constituents into a hybrid insulation of several designs are presented. A final configuration was selected based on high thermal resistance and was tested for thermal resistance and eompressive strain to a pressure of 1.2 MPa (107 msw, meters of sea water) for five continuous pressure cycles. The thermal resistance and compressive strain results were compared to foam neoprene and underwater pipeline insulation. It was found that the hybrid insulation has a thermal resistance significantly higher than both foam neoprene and underwater pipeline insulation at atmospheric and elevated hydrostatic pressures (1.2 MPa). The total thermal resistance of the hybrid insulation decreased 32% at 1.2 MPa and returned to its initial value upon decompression. It was concluded that the hybrid insulation, with modifications, could be used for wetsuit construction, shallow underwater pipeline insulation, or any underwater application where high thermal resistance, flexibility, and resistance to compression are desired.